No Snmp Community Index - Siemens SCALANCE XM-400 Configuration Manual

Result
The settings are configured.
Further notes
You delete the details of an SNMP community with the
You show the details of an SNMP community with the
You show the status information of the SNMP communication with the
7.8.2.7

no snmp community index

Description
With this command, you delete the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp community index <CommunityIndex>
The parameter has the following meaning:
Parameter
CommunityIndex
Result
The details of an SNMP community are deleted.
Further notes
You configure the details of an SNMP community with the
You show the details of an SNMP community with the
You show the status information of the SNMP communication with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Name of the community
Network protocols
no snmp community index
command.
show snmp community
show snmp
Range of values / note
max. 32 characters
snmp community index
command.
show snmp community
show snmp
7.8 SNMP
command.
command.
command.
command.
397