Show Logbook; Show Cabletest Interface - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.1 Event and fault handling
Result
Startup information is shown.
12.1.3.6

show logbook

Description
With this command, you display the content of the logbook. The log entries are categorized
differently.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
The parameters have the following meaning:
Parameter
info
warning
critical
Result
The content of the logbook is displayed.
12.1.3.7

show cabletest interface

Description
This command shows the result of the cable test of the interface.
888
or
cli#
Description
All log entries of the categories "Information", "Warning" and "Critical" are
displayed.
All log entries of the categories "Warning" and "Critical" are displayed.
All log entries of the category "Critical" are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11