Siemens SCALANCE XM-400 Configuration Manual page 125

Parameter
cos-map
dscp-map
output-rate-limit
unicast-blocking
ospf
vrrp
loopd
events
redundancy
passive
umac
nat
fmp
pim
router-
advertisement-
blocking
all
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The selected configuration settings of the device are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Shows the configuration settings of the
COS function
Shows the configuration settings of the
DSCP map function
Shows the configuration settings of the
output rate limit function
Shows the configuration settings of the
unicast blocking
Shows the configuration settings of the
Open Shortest Path First
Shows the configuration settings of the
Virtual Router Redundancy Protocol
Shows the configuration settings of
loop detection
Shows the configuration settings of the
events
Shows the configuration settings of the
redundancy
Shows the configuration settings of
passive listening
Shows the configuration settings of the
user configuration
Shows the configuration settings of the
Network Address Translation
Shows the configuration settings of the
Fiber Monitoring protocol
Shows the configuration settings of the
Independent Multicast protocol
Shows the configuration settings of the
router advertisement blocking.
shows all configuration settings and all
default parameters. Some parameters
cannot be changed.
Configuration
3.4 Configuration Save & Restore
Range of values / note
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
125