No Dot1X Guest-Vlan Vlan-Id - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.7 Port-based Network Access Control (Dot1X)
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
dot1x guest-vlan vlan-id <vlan-id (1 - 4096)>
The parameters have the following meaning:
Parameter
vlan-id
-
Result
The guest VLAN ID is assigned to the port.
Further notes
You reset the guest VLAN ID to the default value with the
command.
id
You display this setting and other information with the
11.7.3.4

no dot1x guest-vlan vlan-id

Description
With this command, the guest VLAN ID is reset to the default value 1.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x guest-vlan vlan-id
872
Description
Keyword for the VLAN ID
VLAN ID
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
-
1 - 4096
no dot1x guest-vlan vlan-
command.
show dot1x
Configuration Manual, 06/2016, C79000-G8976-C252-11