Protocol-Vlan - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
The parameters have the following meaning:
Parameter
ip
novell
netbios
appletalk
other
enet-v2
Result
The protocol is removed from all protocol groups.
Further notes
You create the protocol group with the
You can display the status of this function and other information with the
protocols-group
6.1.2.5

protocol-vlan

Description
With this command, you enable the protocol-based classification on all interfaces.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
protocol-vlan
194
Description
Internet Protocol v4
Novell Netware protocol
Netbios via TCP/IP
Appletalk
Other protocol.
Frame structure is Ethernet II
map protocol
command.
Range of values / note
HEX 08:00
HEX 81:38
HEX f0:f0
HEX 80:9b
enter the hexadecimal protocol
value.
other:
•
IPV6:
•
LLDP:
•
PTP IEEE1588:
•
EAP (802.1X):
•
-
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
aa:aa
86:DD
88:CC
88:F7
88:8E
show vlan