No Spanning-Tree Mst Pseudorootid - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
Further notes
You can reset the settings to the default values with the
pseudoRootId
You display this setting and other information with the commands that start with
spanning tree ...
6.3.5.21

no spanning-tree mst PseudoRootId

Description
With this command, you reset a pseudoroot MAC address and the priority of the spanning
tree configuration to the default values.
The default values are as follows:
● The priority is configured to the priority of the device.
● The MAC address is configured to the MAC address of the device.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
no spanning-tree[mst<instance-id(1-64)>]pseudoRootId
The parameters have the following meaning:
Parameter
mst
instance-id
Result
The pseudoroot MAC address and the priority are rest to the defaults.
Further notes
You configure the settings with the
You display this setting and other information with the commands that start with
spanning tree ...
274
command.
.
Description
Keyword for a spanning tree instance
Number of the instance
spanning-tree mst pseudoRootId
.
no spanning-tree mst
Range of values / note
-
1 ... 64
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show
command.
show