Syntax
Call up the command with the following parameters:
smtp-port <smtp-port(1-65535)>
The parameter has the following meaning:
Parameter
smtp-port
Result
An SMTP port is configured.
Further notes
You can reset the setting to the default with the
You display the setting with the
7.9.2.7
no smtp-port
Description
With this command, you reset the SMTP port to the default.
The default value is 25.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
no smtp-port
Result
The SMTP port is reset to the default value.
Further notes
You configure the setting with the
You display the setting with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Value for the SMTP port
show smtp-port
command.
smtp-port
show smtp-port
Range of values / note
1 ... 65535
Default: 25
command.
no smtp-port
command.
command.
Network protocols
7.9 SMTP Client
419