Show Vlan Device Info; Show Vlan Learning Params - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

If you do not select any parameter from the parameter list, the entries of all available

interfaces are displayed.

The information for the selected VLAN is displayed.

show vlan device info

This command shows all the global information that is valid for all VLANs.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show vlan device info

The global information is displayed.

This command shows the parameters for the automatic learning of addresses for selected or

all VLANs (active and inactive VLANs).

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Number of the addressed VLAN or

Shows a summary of the VLANs

Network structures

Range of values / note