Security and authentication
11.3 MAC access control list
11.3.2.1
mac access-list extended
Description
With this command, you generate a MAC access control list and change to the MAC ACL
configuration mode.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
mac access-list extended<access-list-number(1-128)>
The parameter has the following meaning:
Parameter
access-list-number
Result
A MAC access control list has been generated.
You are now in the MAC ACL configuration mode.
The command prompt is as follows:
cli(config-ext-macl)#
Further notes
You delete the MAC access control list with the
You exit the MAC ACL configuration mode with the
You display the configuration of the access control list with the
11.3.2.2
no mac access-list extended
Description
With this command, you delete a MAC access control list.
826
Description
Number of the access control list
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
1 ... 128
no mac access-list extended
command.
exit
show access-lists
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.