No Distance - Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.7 RIPng (IPv6)
The parameters have the following meaning:
Parameter
dist
route-map
name
Result
The value for the administrative distance is set.
Further notes
You reset the administrative distance to the default with the
9.7.3.2

no distance

Description
With this command, you reset the administrative distance back to the default value.
Requirement
You are in the RIPng router configuration mode.
The command prompt is as follows:
cli(config-ripng)#
Syntax
Call up the command with the following parameters:
no distance [route-map <name(20)>]
The parameters have the following meaning:
Parameter
route-map
name
Result
The value for the administrative distance is reset.
698
Description
The value for the administrative dis-
tance.
Keyword for a route map
Name of the route map
Description
Keyword for a route map
Name of the route map
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
1 ... 255
Default: 120
-
Maximum of 20 characters.
no distance
Range of values / note
-
Maximum of 20 characters.
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.