Dhcpv6 Client (Ipv6); The "Show" Commands; Show Ipv6 Dhcp; Show Ipv6 Dhcp Interface - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

DHCPv6 client (IPv6)

This section describes commands for DHCPv6.

This section describes commands with which you display various settings.

This command shows the DHCPv6 configuration.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameter assignment:

show ipv6 dhcp

The configuration is displayed.

This command shows the DHCPv6 configuration and the DHCPv6 information that was

received from the DHCPv6 server.

You are in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Network protocols

7.4 DHCPv6 client (IPv6)