Password - Siemens SCALANCE XM-400 Configuration Manual

Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
delete{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The files are displayed or the file is deleted.
Further notes
With the "
3.2.5.2

password

Description
With this command, you activate and configure the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
password {showfiles|filetype<filetype>[pw<password>]}
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Shows the available files
Keyword for the file type to be deleted
Name of the file type
" command, you can display the file types.
show loadsave files
Configuration
3.2 Load and Save
Range of values / note
-
-
max. 100 characters
115