Show Ip Igmp Snooping Statistics - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.3 IGMP snooping
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
show ip igmp snooping mrouter [Vlan <vlan index>] [detail]
The parameters have the following meaning:
Parameters
Vlan
vlan index
detail
Result
A list of the active ports is displayed.
8.3.1.6

show ip igmp snooping statistics

Description
This command shows the statistical information about IGMP snooping for all or a selected
VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show ip igmp snooping statistics [Vlan<vlan id>]
The parameters have the following meaning:
Parameter
Vlan
vlan id
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
460
Description
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
Specifies that detailed information is displayed.
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Range of values / note
-
1 ... 4094
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values
-
1 ... 4094
-