Show Snmp Targetaddr; Show Snmp Targetparam - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Call the command without parameters:

show snmp notif

The configured SNMP notification types are displayed.

show snmp targetaddr

This command shows the configured SNMP target addresses.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show snmp targetaddr

The configured SNMP target addresses are displayed.

This command shows the configured SNMP target parameters.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

Network protocols