No Ip Igmp Limit - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
ip igmp limit <value(1-4096)>
The parameter has the following meaning:
Parameter
value
Result
The maximum number is defined.
Further notes
You delete the limit for learnable multicast groups on the device with the
command.
You display the configured multicast groups with the
8.2.2.6

no ip igmp limit

Description
With this command, you delete the limit for learnable multicast groups on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no ip igmp limit
Result
The limit is deleted.
Further notes
You define the maximum number of multicast groups that can be learned using IGMP with
the
You display the configured multicast groups with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Number of multicast groups
command.
ip igmp limit
Layer 2 management protocols
Range of values / note
1 ... 4096
no ip igmp limit
show ip igmp global-config
show ip igmp global-config
8.2 IGMP
command.
command.
441