Further notes
You display the table with the commands
vrid
9.5.2
The "show" commands
This section describes commands with which you display various settings.
9.5.2.1
show vrrp3
Description
This command shows the settings of a virtual router.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vrrp3 [interface vlan <vlan-id(1-4094)> <VrId(1-255)>]
[{brief|detail|statistics}]
The parameters have the following meaning:
Parameter
vlan
vlan-id
VrId
brief
detail
statistics
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The settings of the virtual router are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
.
or
cli#
Description
Keyword for a VLAN connection
Number of the addressed VLAN
ID of the virtual router
shows brief information on VRRP
shows detailed information on VRRP.
shows the statistics of the VRRP pro-
tocol
and
show vrrp3 interface
Range of values / note
-
1 ... 4094
1 ... 255
-
-
-
Layer 3 functions
9.5 VRRPv3 (IPv4 / IPv6)
show vrrp3 interface -
647