No Track Links; Vrrp Virtual-Ping - Siemens SCALANCE XM-400 Configuration Manual

9.4.3.6

no track links

Description
With this command, you delete the the number of tracked interfaces.
Note
This command is available only with layer 3.
Requirement
You are in the VRRP Router configuration mode.
The command prompt is as follows:
cli(config-vrrp)#
Syntax
Call up the command with the following parameters:
no track <group-index> links
The parameter has the following meaning:
Parameter
group-index
Result
The number of tracked interfaces is deleted.
Further notes
You configure the number of tracked interfaces with the
You display the configured number of tracked interfaces with the
9.4.3.7

vrrp virtual-ping

Description
With this command, you enable pings to virtual addresses.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
ID of the interface tracking
Layer 3 functions
9.4 VRRPv2 (IPv4)
Range of values / note
-
command.
track links
show vrrp track
command.
627