No Password - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.2 Load and Save
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
pw
password
Result
The password for the file is configured and activated.
Further notes
You disable the password with the
3.2.5.3

no password

Description
With this command, you disable the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
no password {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The password for the file is disabled.
116
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Keyword for the password
Password
no password
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Values
-
-
max. 100 characters
-
Enter the password for
the file.
Values
-
-
max. 100 characters