Siemens SCALANCE XM-400 Configuration Manual page 39

Note
Restriction of the number of rules
If you change the following parameters for commands, port-linked comparators are
necessary:
•
•
•
Per port, you can use 8 comparators for a transmission direction (ingress/egress).
The
comparator.
The operator
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
(greater than)
gt
(less than)
lt
range
parameter requires 2 comparators the parameters
range
(equal) does not require any comparators.
eq
Description
2.3 Configuration limits
and each require one
gt lt
39