No Map Protocol - Siemens SCALANCE XM-400 Configuration Manual

Parameter
appletalk
other
enet-v2
protocols-group
Group id integer
Result
The protocol group is created.
Further notes
You delete the protocol group with the
You can display the status of this function and other information with the
protocols-group
6.1.2.4

no map protocol

Description
With this command, you delete a protocol from all protocol groups.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no map protocol
{ip | novell | netbios | appletalk | other <aa:aa>}
enet-v2
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Appletalk
Other protocol.
Frame structure is Ethernet II
Keyword for a protocol group
Number of the group
no map protocol
command.
Network structures
Range of values / note
HEX 80:9b
enter the hexadecimal protocol
value.
other:
•
aa:aa
IPV6:
•
86:DD
LLDP:
•
88:CC
PTP IEEE1588:
•
EAP (802.1X):
•
88:8E
-
-
decimal 1 ... 100
command.
show vlan
6.1 VLAN
88:F7
193