Https Server; The "Show" Commands; Show Ip Http Secure Server Status - Siemens SCALANCE XM-400 Configuration Manual

Network protocols

7.11 HTTPS server

Result
HTTP is disabled on the device.
Further notes
You can display the setting of this function and other information with the
server status
You enable HTTP with the
7.11 HTTPS server
This section describes commands of the Hypertext Transfer Protocol Secure (HTTPS).
7.11.1

The "show" commands

This section describes commands with which you display various settings.
7.11.1.1

show ip http secure server status

Description
This command shows the status of the HTTPS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip http secure server status
Result
The status, cipher suite and version of the HTTPS server are displayed.
422
command.
ip http
or
cli#
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show ip http