Siemens SCALANCE XM-400 Configuration Manual page 832

Security and authentication
11.3 MAC access control list
Parameter
any
host
dest-mac-address
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Note
MAC address input
Use "any", if the rule is to apply to all src and/or dest MAC addresses. This corresponds to
the MAC address "00:00:00:00:00:00".
Result
The MAC access control list is configured.
Further notes
You exit the MAC ACL configuration mode with the
You delete the MAC access control list with the
You display the configuration of the access control list with the
832
Description
Keyword for "all"
Keyword for the MAC address of an
outgoing connection that is locked
MAC address of the locked outgoing
connection
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
-
-
Specify a valid MAC address.
command.
exit
no mac access-list extended
show access-lists
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command.