Whoami - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
change password <passwd>
The parameter has the following meaning:
Parameter
passwd
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
Further notes
You create a user with the
You delete a user with the
You show the created users with the
You configure the password policy with the
11.1.3

whoami

Description
This command shows the user name of the logged in user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Value for the password
user-account
no user-account
or
cli#
Range of values / note
Enter the password.
The entry depends on the password
policy.
The
show password-policy
shows which password policy is currently
being used.
command.
command.
command.
show user-accounts
password-policy
Security and authentication
11.1 User management
command
command.
805