Siemens SCALANCE XM-400 Configuration Manual page 597

Syntax
Call up the command with the following parameters:
redist-config <IPv6-Prefix> <Prefix-Length>
[metric-value <metric>]
[metrictype {
asExttype1 | asExttype2
}] [tag <tag-value>]
The parameters have the following meaning:
Parameter
IPv6-Prefix
Prefix-Length
metric-value
metric
metrictype
asExttype1
asExttype2
tag
tag-value
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The information for the route is specified.
Further notes
You enable the ASBR router with the
You enable OSPFv3 routing with the
You enable the distribution of the routes with the
You delete the information with the
You display the setting with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
IPv6 address
Number of bits belonging to the prefix
(from left to right)
Keyword for the metric of the route
Metric
Keyword for the connection costs
External and internal costs
External costs
Keyword for tag:
Value that is assigned to the aggregated
routes.
ASBR Router
ipv6 router ospf
no redist-config
show ipv6 ospf
Range of values / note
Enter a valid IPv6 address
1 ... 128 bits
128: The node (host) itself
-
1 ... 16777215
-
-
-
-
1 ... 65535
command.
command.
command.
redistribute
command.
command.
Layer 3 functions
9.3 OSPFv3 (IPv6)
597