Configure Terminal; Disable - Siemens SCALANCE XM-400 Configuration Manual

Result
The console session is closed.
Further notes
You show the logged-on users with the
3.1.4

configure terminal

Description
With this command, you change to the Global configuration mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
configure terminal
Result
You are now in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Further notes
You exit the Global configuration mode with the
3.1.5

disable

With the commands
logged in user, the login data remains unchanged.
Description
With this command, you close the Privileged EXEC mode.
You are then in the User EXEC mode.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
show users
and you temporarily change the function rights of the
enable disable
command.
command.
end
Configuration
3.1 System
75