Siemens SCALANCE XM-400 Configuration Manual page 220

Network structures
6.1 VLAN
Syntax
Call up the command with the following parameters:
ports
(
)
[
]
[
]
[name<vlan-name>][add]
The parameters have the following meaning:
Parameter
interface-type
/a-b,0/c,...
port-channel
a,b,c-d
untagged
all
forbidden
name
vlan-name
add
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The existing VLAN configuration is replaced. To add individual interfaces, you need to
recreate the full list.
220
[<interface-type><0/a-b,0/c,...>]
[<interface-type><0/a-b,0/c,...>]
[port-channel<a,b,c-d>]
untagged<interface-type> <0/a-b,0/c,...>
(
[<interface-type><0/a-b,0/c,...>]
[port-channel <a,b,c-d>]
[all]
)
forbidden<interface-type><0/a-b,0/c,...>
[<interface-type><0/a-b,0/c,...>]
[portchannel<a,b,c-d>]
Description
Type or speed of the interface
Port no. of the interface
Keyword for a port channel
Port no. of the interface
Keyword for interfaces or ports that
transfer data packets without VLAN
marking
Specifies that all interfaces or ports are
set to "untagged"
Keyword for forbidden interfaces or
ports
Keyword for the name assignment
Name of the VLAN
Adds and interface to an existing con-
figuration.
Range of values / note
Enter a valid interface.
-
Enter a valid interface name
-
-
-
-
max. 32 characters
-
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11