Ip Igmp Limit - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols
8.2 IGMP
Result
The period of time is reset.
Further notes
You configure the time with the
You display the setting and other information with the
command.
8.2.3.9

ip igmp limit

Description
With this command, you define the maximum number of multicast groups that can be
learned using IGMP on an interface. You can define an exception for special multicast
groups.
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
Syntax
Call up the command with the following parameters:
ip igmp limit <value(1-4096)> [except <Group-List id>]
The parameters have the following meaning:
Parameter
value
except
Group-List id
Result
The maximum number and exceptions are defined.
448
ip igmp last-member-query-interval
Description
Number of multicast groups
Keyword for an exception
ID of the multicast group excluded by the
limit
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
command.
show ip igmp global-config
Range of values / note
1 ... 1000
-
Specify a valid ID.
Configuration Manual, 06/2016, C79000-G8976-C252-11