Show Dot1X Guest-Vlan Mac-Info - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.7 Port-based Network Access Control (Dot1X)
The parameters have the following meaning:
Parameter
interface
interface-type
interface-id
statistics inter-
face
interface-type
interface-id
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The dot1x information is displayed.
11.7.1.2

show dot1x guest-vlan mac-info

Description
This command displays which MAC address and which port are assigned to a guest VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show dot1x guest-vlan mac-info
Result
A list with guest VLAN, MAC address and port is displayed.
866
Description
Keyword for a an interface description
Type or speed of the interface
Module no. and port no. of the interface
Keyword for the display of the statisti-
cal data of the dot1x Authenticator for
an interface
Type or speed of the interface
Module no. and port no. of the interface
or
cli#
Range of values / note
-
Enter a valid interface.
-
Enter a valid interface.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11