Smtp Client - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
4.4.6

SMTP client

Network monitoring with e-mails
The device provides the option of automatically sending an e-mail if an alarm event occurs
(for example to the network administrator). The e-mail contains the identification of the
sending device, a description of the cause of the alarm in plain language, and a time stamp.
This allows centralized network monitoring to be set up for networks with few nodes based
on an e-mail system. When an e-mail error message is received, the WBM can be started by
the Internet browser using the identification of the sender to read out further diagnostics
information.
On this page, you can configure up to three SMTP servers and the corresponding e-mail
addresses.
Description
The page contains the following boxes:
● SMTP Client
Enable or disable the SMTP client.
● Sender Email Address
Enter the name of the sender to be included in the e-mail, for example the device name.
This setting applies to all configured SMTP servers.
● Send Test Mail
Send a test e-mail to check your configuration.
80
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02