No Dot1X Guest-Vlan; Dot1X Guest-Vlan Vlan-Id - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You also need to enable the guest VLAN function for the device. You do this with the
guest-vlan
You disable the function with the
You display this setting and other information with the
11.7.3.2

no dot1x guest-vlan

Description
With this command, you disable the guest VLAN function for a port.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x guest-vlan
Result
The guest VLAN function is disabled for the device.
Further notes
You enable the function with the
You display this setting and other information with the
11.7.3.3

dot1x guest-vlan vlan-id

Description
With this command, you configure a guest VLAN for a port.
The port can only be assigned to the VLAN, if the VLAN has been created on the device.
Otherwise Authentication is rejected.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command in the Global configuration mode.
no dot1x guest-vlan
dot1x guest-vlan
Security and authentication
11.7 Port-based Network Access Control (Dot1X)
command.
command.
show dot1x
command.
command.
show dot1x
dot1x
871