No Poe Custom Maxpwr - Siemens SCALANCE XM-400 Configuration Manual

The parameter has the following meaning:
Parameter
integer
Result
The maximum power is set.
Further notes
You enable the user-defined maximum power for the interface with the
active
You disable the user-defined maximum power for the interface with the
maxpwr active
You delete the user-defined maximum power for the interface with the
command.
3.5.3.4

no poe custom maxpwr

Description
With this command, you delete the user-defined maximum power for a port.
Requirement
You are in the Interface Configuration mode of a PoE interface.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no poe custom maxpwr
Result
The user-defined maximum power is deleted.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Value for the user-defined maximum
power in watts
command.
command.
Configuration
3.5 PoE
Range of values / note
0 ... 30
poe custom maxpwr
no poe custom
no poe custom maxpwr
135