Further notes
You define interface candidates for the bootstrap router with the
command.
You can display information about the selected bootstrap router with the
command.
9.10.5.3
ip pim
Description
With this command, you assign an interface to PIM.
Requirement
● The interface is not a router port.
● You are in the Interface configuration mode
The command prompt is as follows:
cli(config-if-$$)#
Syntax
Call the command without parameter assignment:
ip pim
Result
The interface is assigned to PIM.
Further notes
You delete the assignment with the
9.10.5.4
no ip pim
Description
With this command, you delete the assignment of an interface to PIM.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
no ip pim
Layer 3 functions
9.10 PIM (IPv4)
ip pim bsr-candidate
show ip pim bsr
771