Syntax
Call up the command with the following parameters:
no set tag
Result
The tag of the routing information is not changed.
Further notes
You define the setting that the tag of the routing information is changed with the
command.
You change to the Route maps configuration mode with the command
You display the setting and other information with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Layer 3 functions
route-map
command.
show route-map
9.9 NAT (IPv4)
set tag
.
733