Further notes
You define a multicast group with the
You display the configured multicast groups with the
You delete the limit for learnable multicast groups on an interface with the
command.
You display the setting and other information with the
command.
8.2.3.10
no ip igmp limit
Description
With this command, you delete the limit for learnable multicast groups on the an interface.
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
Syntax
Call the command without parameter assignment:
no ip igmp limit
Result
The limit is deleted.
Further notes
You define the maximum number of multicast groups that can be learned using IGMP on an
interface with the
You display the setting and other information with the
command.
8.2.3.11
ip igmp query-interval
Description
With this command, you define the interval but which the multicast router sends IGMP
queries.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
ip igmp group-list
command.
ip igmp limit
Layer 2 management protocols
command.
show ip igmp group-list
no ip igmp limit
show ip igmp global-config
show ip igmp global-config
8.2 IGMP
command.
449