6.4.2.4
no passive-listening
Description
This command disables "passive listening".
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no passive-listening
Result
The "passive listening" function is disabled.
Further notes
You enable "passive listening" with the
You display the status of "passive listening" with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
passive-listening
show passive-listening
Network structures
6.4 Passive Listening
command.
283