No Redistribute - Siemens SCALANCE XM-400 Configuration Manual

Parameter
ospf
static
metric
integer
route-map
name
Result
The information forwarded by RIP has been specified.
Further notes
You disable the forwarding with the
You display the setting and other information with the
9.7.3.8

no redistribute

Description
This command specifies which route information is not forwarded by RIP.
Note
This command is available only with layer 3.
Requirement
You are in the RIPng router configuration mode.
The command prompt is as follows:
cli(config-ripng)#
Syntax
Call up the command with the following parameters:
no redistribute {default | connected | ospf | static} [route-map <name(20)>]
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Routes learned by OSPF are distribut-
ed.
Static routes are distributed.
Keyword for the metric of the external
standard route.
Value of the metric (hop counter)
Keyword for a route map.
Name of the route map.
no redistribute
Range of values / note
-
-
-
0 ... 16
15 longest possible distance
16: unreachable
-
Maximum of 20 characters
command.
command.
show ipv6 rip
Layer 3 functions
9.7 RIPng (IPv6)
703