No Spanning-Tree Mst - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
spanning-tree mst<instance-id(1-64)>
The parameters have the following meaning:
Parameter
instance-id
cost
port-priority
disable
Note
Configure multiple properties
With each call of the command, you can configure precisely one property.
If you want to configure several properties, call the command several times.
Result
The selected property is configured.
Further notes
You can reset the setting to the default with the
You display these settings and other information with the commands that start with
spanning tree ...
6.3.5.4

no spanning-tree mst

Description
With this command, you reset the various properties of the Multiple Spanning Tree function
to the default value.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
{cost(0-200000000)|port-priority (0-240)|disable}
Description
Number of the addressed instance
Costs of the port for calculating the
lowest cost path.
Priority of the interface
disables the interface for multiple
spanning tree
.
Range of values / note
1 ... 64
0 ... 200000000
Default:
200000 for physical interfaces
•
199999 for port channels
•
0 ... 240 in steps of 16
Default: 128
-
Default:
The Multiple Spanning Tree func-
tion is enabled on the interface
(properties) command.
no spanning-tree mst
Network structures
6.3 Spanning Tree
show
261