Compatible Rfc1583; No Compatible Rfc1583 - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

compatible rfc1583

With this command, you enable compatibility with RFC 1583. Use the command if you still

have old OSPFv2 routers in operation that are not compatible with RFC 2328.

This command is available only with layer 3.

You are in the OSPF Router configuration mode.

The command prompt is as follows:

cli(config-ospf)#

Call the command without parameters:

compatible rfc1583

The compatibility with RFC 1583 is enabled.

Further notes

You disable the compatibility with the

You can display the status of this function and other information with the

With this command, you disable compatibility with RFC 1583.

This command is available only with layer 3.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

no compatible rfc1583

Layer 3 functions

9.2 OSPFv2 (IPv4)