Siemens SCALANCE XM-400 Configuration Manual page 823

Syntax
Call up the command with the following parameters:
no radius-server { ipv4 <ipv4-address> | fqdn-name <FQDN> | ipv6 <ipv6-address>}
[primary]
The parameters have the following meaning:
Parameter
ipv4
ipv4-address
fqdn-name
FQDN
ipv6
ipv6-address
primary
For information on addresses and interfaces, refer to the section "Addresses and interface
names (Page 42)".
Result
The entry for a connection between the RADIUS client and a server or the identification as
primary server is deleted.
Further notes
You configure the connection of a RADIUS client to a server with the
command.
You show the configuration of a RADIUS server on the client with the
command.
You show the statistical information of this function with the
command.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Keyword for an IPv4 address
IPv4 address of the RADIUS server
Keyword for a domain name
Domain name (Fully Qualified Domain
Name)
Keyword for an IPv6 address
IPv6 address of the RADIUS server
Identifies the RADIUS server as prima-
ry server
Security and authentication
11.2 RADIUS client
Range of values / note
-
Enter a valid IPv4 address.
-
Maximum of 100 characters
-
Enter a valid IPv6 address.
-
radius-server
show radius server
show radius statistics
823