Show Ip Igmp Snooping Forwarding-Database; Show Ip Igmp Snooping Globals - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 2 management protocols

8.3 IGMP snooping

show ip igmp snooping forwarding-database

This command shows the multicast forwarding entries for all or a selected VLAN.

● IGMP snooping is enabled on the device

● You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is:

Call up the command with the following parameters:

show ip igmp snooping forwarding-database [Vlan<vlan id>]

The parameters have the following meaning:

For information on names of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 42)".

The multicast forwarding entries are displayed.

This command shows an overview of the settings of IGMP snooping.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameter assignment:

show ip igmp snooping globals

Keyword for a VLAN connection

Number of the addressed VLAN

Range of values / note

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11