Snmp Agent Version; Snmp Access - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The SNMP agent function is disabled.

Further notes

You enable the SNMP agent function with the

snmp agent version

With this command, you configure whether all SNMP queries or only SNMPv3 queries are

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

snmp agent version {v3only|all}

The parameters have the following meaning:

The setting is configured.

With this command, you configure the access to an SNMP group.

You are in the Global configuration mode.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

only SNMPv3 queries are processed

all SNMP queries are processed

Network protocols

Range of values / note

Default: all