Private-Vlan Association - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
Result
The VLAN is not a private VLAN.
Further notes
You define a VLAN as a private VLAN and specify the PVLAN type with the command
private-vlan
You display this setting with the
6.1.4.7

private-vlan association

Description
With this command, you assign secondary PVLANs to a primary PVLAN.
Requirement
● The interface is configured as a primary PVLAN.
● You are in the Interface configuration mode.
The command prompt is:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
private-vlan association [{add|remove}] <secondary_Vlan_list>
The parameters have the following meaning:
Parameter
add
remove
second-
ary_Vlan_list
Result
The secondary PVLANs are assigned to the primary PVLAN.
Further notes
You delete the link between secondary PVLANs and a primary PVLAN with the command
private-vlan association
You display this setting with the
You configure a an interface as a primary PVLAN with the
224
.
show vlan private-vlan
Description
Adds a secondary PVLAN..
Removes a secondary PVLAN..
Number of the secondary PVLAN
.
show interfaces
command.
Range of values / note
-
-
Separate the PVLANs with commas
if you specify several PVLANs.
command.
private-vlan
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
no
command.