Diagnostics
12.4 Port Mirroring
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show monitor {session <session-id(1-7)>}
The parameters have the following meaning:
Parameter
session
session-id
Result
The settings for mirroring ports are displayed.
12.4.2
Commands in the global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
12.4.2.1
monitor
Description
With this command, you enable the port mirroring function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
924
or
cli#
Description
Keyword for a session whose settings
are displayed
Number of the session
command to change to this mode.
configure terminal
or
end
exit
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values / note
-
1 ... 7
command and are then in the