No Alias - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
alias <interface-name>
The parameter has the following meaning:
Parameter
interface-name
Result
The interface was assigned a name.
Further notes
You delete the name of the interface with the
3.1.13.2

no alias

Description
With this command, you delete the name of the interface.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameter assignment:
no alias
Result
The name of the interface is removed.
Further notes
You configure the name of the interface with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Name of the interface
no alias
Range of values / note
max. 63 characters
command.
command.
alias
Configuration
3.1 System
93