Time Dst Recurring - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
time dst date <name(16)> <year (1900-2099)> begin <MMDDhh> end <MMDDhh>
The parameters have the following meaning:
Parameter
name
year
begin
MMDDhh
end
MMDDhh
Result
The entry for the start and end of daylight saving time was created.
Further notes
You display the settings for the daylight saving time changeover with the
command.
5.1.2.4

time dst recurring

Description
With this command, you configure the start and end of daylight saving time with a generic
description.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description
Name of the entry
Year
Keyword for the start of daylight saving
time.
Time for the start of daylight saving
time.
Keyword for the end of daylight saving
time.
Time for the end of daylight saving
time.
System time
5.1 System time setting
Range of values / note
maximum 16 characters
1900 ... 2099
-
Time in the format
Month
MM
Day
DD
Hour
hh
-
Time in the format
Month
MM
Day
DD
Hour
hh
show dst info
159