Result
The assignment table of CoS priorities to queues is displayed.
Further notes
You configure the assignment of the CoS priority to a queue with the
10.5.1.2
show qos dscp-map
Description
This command shows the assignment table of DSCP priorities to queues.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show qos dscp-map
Result
The assignment table of DSCP priorities to queues is displayed.
Further notes
You configure the assignment of the DSCP priority to a queue with the
10.5.1.3
show qos-trust-mode
Description
This command shows port by port the method according to which packets to be forwarded
are prioritized.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
or
cli#
Load control
10.5 Service classes
command.
cos-map
command.
dscp-map
795