No Static-Lease - Siemens SCALANCE XM-400 Configuration Manual

7.5.3.14

no static-lease

Description
With this command, you delete the assignment of an IPv4 address to a MAC address.
Requirement
You are in the DHCPPOOL configuration mode.
The command prompt is as follows:
cli(config-dhcp-pool-<ID>)#
Syntax
Call up the command with the following parameters:
no static-lease { mac <mac-address> | client-id <string> }
The parameter has the following meaning:
Parameter
mac
mac-address
client-id
string
Result
The assignment is deleted.
Further notes
You configure the assignment with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Description Range of values / note
Keyword for a MAC -
address
Unicast MAC address Specify the MAC address.
aa:bb:cc:dd:ee:ff
Keyword for a DHCP -
client ID
Freely definable Enter the required designation.
DHCP client ID
static-lease
Network protocols
command.
7.5 DHCP server
365