Syslog Client; The "Show" Commands; Show Events Syslogserver - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics

12.6 Syslog Client

The parameter has the following meaning:
Parameter
index
Result
The data recording is ended.
12.6 Syslog Client
With the commands in this section, the following settings are configured:
● Transfer of the messages to the Syslog server
● Local buffering and storage of messages
● Receipt and forwarding of messages from other devices (relay mode)
12.6.1

The "show" commands

This section describes commands with which you display various settings.
12.6.1.1

show events syslogserver

Description
This command shows the entries of the configured Syslog server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events syslogserver
Result
The entries of the configured Syslog server are displayed.
944
Description
Number of the recording
or
cli#
Range of values / note
1 ... 52
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11