No Dot1X Mac-Auth Vlan-Assign - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call the command without parameters:
dot1x mac-auth vlan-assign
Result
The VLAN ID for a MAC address is assigned by the RADIUS server.
Further notes
You disable the assignment of the VLAN ID for a MAC address by the RADIUS server with
the
You display this setting and other information with the
11.7.3.11

no dot1x mac-auth vlan-assign

Description
With this command you disable the assignment of the VLAN ID for a MAC address by the
RADIUS server.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x mac-auth vlan-assign
Result
The VLAN ID for a MAC address is no longer assigned by the RADIUS server.
Further notes
You enable the assignment of the VLAN ID for a MAC address by the RADIUS server with
the
You display this setting and other information with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
no dot1x mac-auth vlan-assign
dot1x mac-auth vlan-assign
11.7 Port-based Network Access Control (Dot1X)
command.
show dot1x
command.
show dot1x
Security and authentication
command.
command.
877