Layer 3 functions
9.4 VRRPv2 (IPv4)
Requirement
● The Router configuration mode is enabed.
● You are in the VRRP Router configuration mode.
The command prompt is:
cli(config-vrrp)#
Syntax
Call the command without parameters:
vrrp virtual-ping
Result
The function for pings to virtual addresses is enabled.
Further notes
You disable the setting with the
You display the status of this function and other information in Privileged EXEC mode with
the
9.4.3.8
no vrrp virtual-ping
Description
With this command, you disable pings to virtual addresses.
Requirement
● The Router configuration mode is enabed.
● You are in the VRRP Router configuration mode.
The command prompt is:
cli(config-vrrp)#
Syntax
Call the command without parameters:
no vrrp virtual-ping
Result
The function for pings to virtual addresses is disabled.
628
command.
show vrrp
command.
no vrrp virtual-ping
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11